-
As the demand for multi-component reactions in laboratories continues to grow, multi-channel fluid control faces increasing challenges. Traditional equipment is often bulky, while limited channel-level control can compromise experimental accuracy, repeatability, and the reusability of experimental protocols.To address these challenges and deliver an efficient, reliable fluid control workstation, Innofluid introduces the LabSmart Multi-Channel Independent Peristaltic Pump.Featuring a highly integrated, all-in-one design and a bright 5-inch touchscreen, LabSmart enables independent operation of multiple channels at different flow rates, with precise calibration, synchronized operation, and no channel interference.Its innovative 10-roller mechanism helps reduce pulsation for smooth, continuous fluid delivery, while the elastic tube clamping mechanism helps extend tubing service life. LabSmart simplifies complex experiments with precise, reliable, and independent fluid control.
- 5" HD Color Touchscreen: Proprietary anti-shake algorithm ensures ultra-responsive control and crystal-clear visuals.
- 10-Roller Pump Head: Significantly reduces fluid fluctuation for smooth flow; custom high-strength polymer extend service life.
- Supports four operating modes: Flow Rate Mode, Timed&Volume, Time&Speed, and Volume&Speed. Multi-channel and multi-mode support, with multi-group recipe storage for complex scenarios.
- High-performance main control chip with mode-specific algorithms for unmatched stability and precision.
- 0.001 rpm Resolution: Custom high-microstep motor with optimized drive logic for delicate and precise micro-volume control.
- Wide-Voltage Design: Robust anti-interference capability ensures stable, continuous operation in harsh environments.
- Spring-Loaded Mechanism: Infinitely adjustable tubing gaps to maximize tubing longevity and dosing accuracy.
- Optional leak detection sensor with a pre-programmed leak response procedure to protect equipment safety.
LabSmart Multi-Channel Independent Control System
3-Year Warranty
- Speed range：0.1-150rpm
- Flow range：0.020uL/min-48.379mL/min
Optional pump head：
AMC
- Product Introduction
- Technical Parameter
- Pump Head Parameter
- OSD
- Dimension
Product Introduction
Technical Parameter
| Flow rate resolution | 0.001uL/min |
| Speed range | 0.01-150rpm |
| Operation method | Touch screen |
| Flow rate range | 0.02uL/min(0.13*0.86)-48.379mL/min(3*1) |
| Temperature | 0-40℃ |
| Power-off memory | Retains pre-power-loss data and parameters upon re-energization |
| Communication interface | RS232/RS485 |
| Back suction angel | 0-360° |
| Power supply | AC100-240V/100W |
| Speed resolution | 0.001rpm |
| Common modes | Up to 10 common modes can be saved |
| External control signals | Passive switch signal: such as a foot pedal switch Active switch signal: compatible with 5–24 V DC input |
| Relative humidity | <80% |
| Motor type | Stepper motor |
| Output interface | Outputs the motor running status and rotation direction (open-collector output) |
| IP | IP31 |
Pump Head Parameter
| Model | Rollers number | Speed | Channel Number |
Tubing |
|
Tubing maximum pressure (Mpa) | |
| Continuous | Intermittent | ||||||
| LabSmart | 10 rollers | 0.01-150rpm | 4 Channel | 1×1 | 0.503-7.549 | 0.1 | 0.1 |
| 2×1 | 1.835-27.519 | ||||||
| 2.4×0.8 | 2.542-38.130 | ||||||
| 3×1 | 3.226-48.379 | ||||||
| 0.13×0.86 | 0.02-0.289 | ||||||
| 0.19×0.86 | 0.03-0.439 | ||||||
| 0.25×0.86 | 0.051-0.759 | ||||||
| 0.51×0.86 | 0.134-1.999 | ||||||
| 0.89×0.86 | 0.298-4.470 | ||||||
| 1.14×0.86 | 0.611-9.159 | ||||||
| 1.42×0.86 | 1.250-18.750 | ||||||
| 1.52×0.86 | 1.44-21.599 | ||||||
| 2.06×0.86 | 1.974-29.599 | ||||||
| 2.79×0.86 | 2.858-42.859 | ||||||
OSD
Dimension（Unit：mm）
